
Polyaspartic floor coatings
Polyaspartic Floor Coatings in Palm Beach, FL
Polyaspartic is a coating that stays clear in the sun and cures fast. We use it as the topcoat on most Palm Beach County garage floors, and as the whole system on some.
- 224 Datura St ste 740, West Palm Beach
- (443) 501-0540
- UV stable
- Faster cure
- Over flake or color
- Free On-Site EstimatesWe measure and price the floor in person.
- Ground, Not Just WashedEvery slab is diamond ground before coating.
- Moisture Checked FirstWe test the slab before choosing the system.
- Open 24 Hours, Mon to FriCall or send the form any time.
Polyaspartic floor coatings
What Is a Polyaspartic Floor Coating?
Polyaspartic is a type of aliphatic polyurea coating. Unlike standard epoxy, it's UV stable, which means it doesn't yellow in sunlight, and it cures much faster.
That makes it a good fit for Palm Beach County, where garage doors stay open to strong sun for hours. We use polyaspartic as the clear topcoat over flake and solid-color epoxy floors, and on some slabs as the body coat too.
Fast cure is a benefit and a constraint. It shortens the job, but it gives the crew less working time, so it takes an experienced installer to put it down well.
Layer by layer
Where Each Coating Goes in the Floor
A garage floor is a stack of layers, and each one has a job. This is how we usually build a floor that sees Florida sun.
| Layer | What we usually use | Why |
|---|---|---|
| Primer | A moisture-tolerant epoxy when the slab tests high | It bonds to damp concrete and slows vapor coming up |
| Base coat | Epoxy, or polyaspartic on selected slabs | Builds thickness and holds the flake or color |
| Finish | Flake, solid color or metallic | The look you picked at the estimate |
| Topcoat | Clear polyaspartic | UV stable, so the floor doesn't yellow where the sun reaches it |
The slab decides the primer and base coat. We test it before we choose.

Fast cure
What a Fast-Curing Coating Means for You
Polyaspartic cures much faster than standard epoxy, so the crew mixes smaller batches and works the floor in sections. That takes a practiced team, and it's the main reason polyaspartic is a professional product rather than a weekend kit.
For you, it usually means a shorter job and a quicker return to using the garage. We give you the exact times for walking and parking at the estimate, since they depend on the system and the weather.
What changes for you
- Shorter schedule than an all-epoxy floor.
- A topcoat that holds its color in the sun.
- Cure times confirmed for your slab and the weather.
What's included
Where Does Polyaspartic Go in the System?
Polyaspartic can be one layer of the floor or most of it. We choose based on the slab and the sun.
Ground Slab
Same prep as any coating: diamond grinding and repairs.
Base Coat
Epoxy or polyaspartic, chosen for the slab's moisture and the schedule.
Flake or Color
Decorative flake or a solid color goes on the base.
Polyaspartic Topcoat
A clear, UV-stable topcoat seals the floor and takes the wear.

How it works
How Does a Polyaspartic Job Run?
A polyaspartic job moves quickly once the prep is done.
Step 1: Estimate
We measure, check the slab and how much sun the floor gets, and recommend a system.
Step 2: Grind and Repair
The slab is ground and cracks and pits are filled.
Step 3: Coat
Base, flake or color, then the polyaspartic topcoat, in a tighter schedule.
Step 4: Walkthrough
We walk the floor with you and give you the times for foot traffic and cars.
Polyaspartic vs epoxy
Polyaspartic or Epoxy?
Most good garage floors use both. Here's what each does best.
Polyaspartic: Sun and Speed
UV stable and fast curing. The right choice for the layer that faces the sun.
Epoxy: Build and Bond
Thick, strong base coats with a longer working time for flake and metallic work.
Together
An epoxy base with a polyaspartic topcoat gives you both, and it's what we install most.
Cost
What Does a Polyaspartic Coating Cost?
A polyaspartic topcoat usually adds to the cost of a plain epoxy floor, and a full polyaspartic system costs more again. In exchange you get a floor that holds its color in the sun and a shorter job.
We price every floor at a free estimate and explain the options side by side.
Polyaspartic vs epoxy in Florida sunWhat moves the price
- Square footage
- Topcoat or full system
- Slab repairs
- Flake or solid color
Measure Your Floor
Pick a typical garage size or enter your own. We measure exactly at the free estimate.
440square feet
Related services
Other Floors We Coat
Polyaspartic finishes most of these.

Garage Epoxy Floor Installation
The full garage floor system, prep to topcoat.
- Two- and three-car
- UV topcoat


Where we work
Polyaspartic Coatings Across Palm Beach County
We install polyaspartic coatings in West Palm Beach and these cities and towns.
Asked often
Polyaspartic Coating Questions
Does polyaspartic yellow in the sun?
Aliphatic polyaspartic coatings are UV stable, so they hold their color in sunlight much better than standard epoxy.
Is polyaspartic better than epoxy?
They do different jobs. Epoxy builds thick, strong base coats; polyaspartic makes a fast, UV-stable topcoat. Most of our garage floors use both.
How fast can I use a polyaspartic floor?
Sooner than a plain epoxy floor. We give you the exact times for foot traffic and cars at the estimate, since they depend on the system and the weather.
Can polyaspartic go over my existing epoxy floor?
Sometimes, if the existing floor is well bonded. It has to be cleaned and abraded first. A peeling floor gets ground off instead.
Is polyaspartic good for a garage by the pool?
Yes. It holds up to sun and water, and a grip additive can go in the topcoat for wet feet.
Free on-site estimate
Get a Free Polyaspartic Estimate
Tell us where the floor is and how much sun it gets. We'll recommend a system at the free estimate.
- Free on-site estimate
- Slab checked for moisture
- Concrete ground before every coating
