
Commercial epoxy flooring
Commercial Epoxy Flooring in Palm Beach, FL
Coatings for warehouse bays, shops, showrooms and back-of-house slabs, with safety lines and zones laid out with you. We plan the work around your hours so the floor is back in use on schedule.
- 224 Datura St ste 740, West Palm Beach
- (443) 501-0540
- Lines and zones
- Scheduled around you
- Free site visit
- Free On-Site EstimatesWe measure and price the floor in person.
- Ground, Not Just WashedEvery slab is diamond ground before coating.
- Moisture Checked FirstWe test the slab before choosing the system.
- Open 24 Hours, Mon to FriCall or send the form any time.
Commercial epoxy flooring
What Commercial Floors Do We Coat?
We coat working floors across Palm Beach County: warehouse and storage bays, auto and marine shops, showrooms, gyms, and the back-of-house slabs behind restaurants and stores.
Many of those floors sit in the industrial and commercial corridors off Southern Boulevard, Okeechobee Boulevard and I-95. They see forklifts, carts, foot traffic and spills, so the system is chosen for the work done on it, not just the look.
A commercial job starts with a site visit. We look at the slab, the traffic and the schedule, then lay out lines, zones and phasing with you before we price it.

Lines and zones
Planning Lines, Walkways and Zones
Lines on a working floor are a plan for how people and equipment move. Before we price the job, we walk the space with you and mark out aisles, walkways, parking for carts and lifts, and any areas that need to stay clear.
The lines are coated into the floor, under or within the topcoat, so they last as long as the floor instead of wearing off like paint.
What we lay out with you
- Forklift and cart aisles, with turning room at the ends.
- Walkways from doors to work areas and exits.
- Keep-clear zones at panels, eyewash stations and fire equipment.
Match the system
Which System Fits Which Space?
Commercial floors are chosen for what happens on them. These are the spaces we coat most and what we usually suggest.
| Space | What the floor takes | What we usually suggest |
|---|---|---|
| Warehouse and storage | Forklifts, pallet jacks, carts | A thicker solid-color system with coated-in lines |
| Auto shop | Oil, fluids, dropped tools, lifts | Solid color with a chemical-resistant topcoat |
| Marine shop | Water, fuel, solvents, trailers | Solid color or flake with grip in the topcoat |
| Showroom or lobby | Foot traffic and a high-gloss look | Metallic or flake under a clear topcoat |
| Back-of-house storage | Carts, spills, daily mopping | Solid color that wipes clean |
Kitchens with specific code or thermal-shock requirements need their own system, which we discuss at the site visit.
What's included
What Goes Into a Commercial Floor?
Commercial floors take the same prep as a garage, plus planning for how the space runs.
Prep at Scale
Larger grinders and dust extraction for big slabs, with old coatings removed.
Joint and Crack Repair
Control joints, cracks and spalls are repaired so carts and forklifts roll smoothly.
Coating System
A system chosen for the traffic, spills and cleaning the floor will see.
Lines and Zones
Safety lines, walkways and work zones laid out with you and coated in.

How it works
How Does a Commercial Job Run?
The biggest difference from a garage is the schedule. We plan it around your business.
Step 1: Site Visit
We measure, check the slab and talk through traffic, spills and hours.
Step 2: Plan and Phasing
We lay out lines and zones and split the floor into phases if it has to stay open.
Step 3: Prep and Coat
Grinding, repairs and coating, phase by phase or after hours.
Step 4: Return to Service
We walk the floor with you and confirm when each area can take traffic.
Why coat it
Why Coat a Commercial Slab?
Bare concrete in a working space dusts, stains and is hard to keep clean.
Easier to Clean
A sealed floor wipes clean instead of soaking up oil, fluids and spills.
Brighter Space
A light-colored coating reflects light, which helps in warehouses and shops.
Less Dust
Coating stops the slab from dusting onto stock, tools and equipment.
Cost
What Does a Commercial Epoxy Floor Cost?
Commercial pricing depends on the square footage, the condition of the slab, the system and the schedule. Phased or after-hours work and line striping add to the job.
We price every commercial floor after a free site visit.
What moves the price
- Square footage
- Joint and crack repair
- Coating system
- Phasing and hours
Related services
Other Floors We Coat
These services often go with a commercial job.

Concrete Grinding & Surface Preparation
Old coatings ground off and joints repaired first.
- Old paint removed
- Moisture checked

Polyaspartic Floor Coatings
A fast-cure topcoat for a quicker return to service.
- Won't yellow
- Faster cure

Where we work
Commercial Floors Across Palm Beach County
We coat commercial floors in West Palm Beach and these cities and towns.
Asked often
Commercial Epoxy Floor Questions
Can you coat my floor without closing the business?
Often, yes. We split the floor into phases or work after hours, and plan the order with you so the space keeps running.
Can you add safety lines and walkways?
Yes. Lines, walkways and work zones are laid out with you and coated into the floor.
Do you remove old coatings in warehouses?
Yes. Failing coatings and paint are ground off before a new system goes down.
Which areas of Palm Beach County do you cover for commercial work?
We work across the county, including the commercial and industrial corridors off Southern Boulevard, Okeechobee Boulevard and I-95.
Do you coat restaurant and back-of-house floors?
We coat back-of-house and storage slabs. Kitchens with specific health-code or thermal-shock requirements need a system chosen for them, which we discuss at the site visit.
Free on-site estimate
Get a Free Commercial Floor Estimate
Tell us about the space, the square footage and your hours. We'll set up a free site visit.
- Free on-site estimate
- Slab checked for moisture
- Concrete ground before every coating
